沃尔玛walmart验厂包含社会责任、质量、反恐三种，社会责任验厂主要是对工人的基本权利有一个保障，像工时、工资、社保，消防问题、政府文件都是审核重中之重，重量包含利器管控、金属管控、产品质量等，反恐是对供应链安全方面的审核。沃尔玛分包商只验社会责任，其它都需要三项审核，消防问题是沃尔玛的零容忍项，比如消防栓、消防通道、消防警铃、灭火器、楼梯等。
沃尔玛验厂质量审核内容
1. Are lighting sufficient in the following key areas?
以下关键区域光度是否足够？1.1. Inspection Areas 检验区
1.2. Production Areas 生产区域
1.3. Packaging 包装区域
1.4. Warehouse/Storage and Loading Areas 仓库/ 存储和装载区
2. The facility maintains clean and organized production, finishing and packing areas.
工厂的生产，成品和包装区域保持干净和有序的生产
3. Facility has separate inspection area for each department with inspection tables
and proper ventilation.
工厂每个部门有独立的检验区域，有检验桌和适宜的通风。
4. Facility has documented and adequate pests control program which includes
frequent inspections. (in-house or 3rd party)
工厂有文件化的和足够的害虫控制程序和检验记录（内部或第三方）
5. Facility has documented moisture control program which includes frequent
inspections. [Mandatory for factories producing products with solid wood &
composite wood parts]
工厂有文件化的湿度控制程序及检验记录[ [ 对于生产实木及复合木制品的工厂的强制要
求] ]
6. Are storage conditions appropriate and adequate for raw material, WIP, finished
products to avoid deterioration of quality or safety? Especially for sensitive
materials/components. For example, for IC storage. Does factory have good
environmental control on temperature, humidity, etc.?
来料, 半成品，成品的 的储存环境是否适宜 和充足以避免物料的质量或安全性降级退化,
尤其对敏感材料或部件。 比如 IC 的存储。 工厂对温度，湿度等是否有良好的环境控
制。
7. No broken windows or leaking roofs that may result to product contamination was
observed during Audit.
没有破碎的窗子或漏的屋顶，其可能导致审核中发现产品被污染
8. Factory implements strict sharp tools control procedure to prevent scissors, knives,
blades, broken glasses and needles to be mixed with product.
工厂是否建立了严格的利器控制程序，以防剪刀，刀具，刀片，碎玻璃，针混入产
品。
Critical
关键点
9. Factory implements a broken needle control process [Applies for products that
requires sewing and/or those used in ticketing or Kimble guns for tags]
工厂实施断针控制过程。（适用于产品有缝制工序，标枪工序）。
Critical
关键点
10. Factory has metal detecting unit (Airport System) and located at the right
finishing area and is enclosed and secured and have regular calibration records
[Scoring will not apply (N/A) if factory does not need this machine]
工厂有金属验针设备（机场式）并置于合适的成品区，此区域隔离，安全，金属验针
设备有定期的校准记录 [ [ 如果工厂不需要这个设备, , 分数就打 N/A]
11. Does the plant have a "back up" power supply available that will allow production
to continue in case of power failure?
工厂是否有备用电源以便停电时生产可以继续
12. Does the factory have established procedure and effective industrial waste
management system in place?
工厂是否有建立的程序和有效的工业废弃物管理体系？
以上所有资讯来源于验厂之家，如需了解更多请关注：http://www.csr007.com/
分享到：
